banneers
lees

Welcome to the original Lee’s Cutlery.  We are proud to celebrate over three decades of providing our customers the finest Custom Knives and High Quality Production knives availible.

 

We are also an Authorized Dealer for

ARIZONA REGULATOR®

AMERICAS TRIGGER®

I have known J.D. for many years clear back to when he used to make hand built Buck 110 Autos.

Terms

TERMS

 

 

We do not sell, service, distribute. or otherwise have any dealings with controlled items which require any type of Federal licensing as in serialized items such as firearm receivers, complete firearms, NFA regulated items, assembled ammo, and or ammo components that require licensing or storage requirements to be met.

Even though many gun and knife related products are created to be easy to  use or install without needing any specialized machinery we recognize not everyone is a “Gunsmith” or a "Cutler". Thus the Lawyers have let us know that our official position is all related products are to be installed by a qualified Individual.

 

You are responsible for proper safety precautions and proper use of any and all of our products or information.  You are responsible for knowing and following the laws of your area.  Nothing on this site to include the site itself, products, information, etc. is intended for distribution, possession, use, etc. in any areas that have restrictions on any of the a fore mentioned and any others that may have been unknowingly been omitted from the list.

 

 

Payment:

 

It takes one day to a few days for your payment to process and clear depending on the type of payment and who issued it.  Once you see your payment has cleared you can expect to see your order ship within a few days.

 

All card orders are required to ship to the billing name and address for the card.  All card orders must go thru the site.  We never see or posses your card number, the card number you enter into the secure payment system is strictly between you and the card processor.  All we receive is a notice to ship and ship to address once payment is made. We do not take card orders on the phone nor do we have a card swipe capability for security and anti-fraud reasons.

 

IF YOUR INFO YOU PUT INTO THE ORDER FROM HERE DOES NOT MATCH WHAT YOUR CARD ISSUER SAYS ITS SUPPOSED TO BE WE WILL CANCEL THE ORDER AND THE CANCELLATION FEE PER OUR TERMS WILL APPLY

 

 

Shipping:

 

We only ship via U.S.P.S. Priority Mail. If the order will fit in a Small Flat Rate Box shipping is  If you want additional insurance above what U.S.PS includes that is optional. Contact me.

 

 

Fulfillment:

 

We do not log mail in orders into a fulfillment tracking system.  This is done for your privacy.  They are kept in order received.  Once your order is next in the rack it gets processed.  Depending on when the order is received it could take a few days to process and ship, or a little longer if we are assembling and packaging a new run of parts.  Depending on order volume it may take more time for your order to reach the next in rack.  We process and ship as fast as possible.  We do not process your mail in payment until your order is ready to ship.  Mail in orders on hand are filled prior to us adding inventory to the site for click and buy card orders.  

 

 

Warranty / Returns / etc:

 

My return policy is simple if you are not happy with the knife for any reason return it for a full refund. Return postage not included in refund. Please contact me before returning.

Lee Beene

PO Box 6422

Mesa, AZ 85216

480.225.6897

 

For items other than knives see the indvidual product page for any additional Terms pertaining specifically to those items.

 

 

Cancellations:

 

All card orders canceled after payment is received but prior to being shipped will be charged a 15% cancellation fee in addition to the shipping label cost if shipping label has already been printed. Our card processor charges us fees for each transaction, each direction, inbound payments and outbound cancellations or refunds that we cannot recover by any method if you change your mind and want to cancel your order prior to it leaving our building.  To cancel a mail in order send us an email beenejl43@earthlink.net  or call 480.225.6897.  As long as we have not deposited the payment and shipped the order we will work with you to get everything back to you.  

 

 

Privacy and your info:

 

We do not share or provide your info to anyone for any reason other than to process your order and get it shipped out.  The only info there is is what you use with the card processor, we never see your card number.  The ship to info we receive once payment is made is used to create the shipping label to get your order shipped to you.  If in the future we activate a back in stock notification system, if you choose to use it you would share your email address into it so it can alert you when more stock has been added to the site for click and buy orders.  We do not keep a file with your info in our office. 

 

 

Updating of Terms and Site:

 

We reserve the Right to update the Terms and Site at any time.  Without contacting you prior to any change in Terms or Site being made.  It is your responsibility to review our Terms or Site on your own. 

Terms

LEGAL NOTICE - THIS NOTICE IS CLEAR INDICATION THAT ANY REFERENCE TO ANY OTHER(S) TRADEMARKS, LOGOS AND BRAND NAMES ARE FOR IDENTIFICATION PURPOSES ONLY AND THEY NEITHER IMPLY ENDORSEMENT NOR ANY CLAIM OF LICENCE OR ADVERSE RIGHT, THAT USE OF OUR PRODUCTS WITH OTHER BRAND TRIGGERS, TO INCLUDE ANY MODIFICATION OF ANY TRIGGER MAY VOID THE TRIGGER MANUFACTURERS FACTORY WARRANTY CONTACT TRIGGER MANUFACTURER FOR THEIR TRIGGER WARRANTY INFO, AND THAT ANY TRADEMARKED NAMES REMAIN THE EXCLUSIVE PROPERTY OF THE REGISTRANT.

 

 

 

 

Factory Built DD MK18 Pistol and DD M4V7 Carbine are the benchmark used at AZR for Std Mil-Spec AR Rifles and Pistols as they are manufactured within the OG COLT® Mil-Spec Parameters Required. 

 

(COLT® IS A REGISTERED MARK BELONGING TO COLT® AND IS ONLY USED HERIN TO REFERENCE THE ORIGINAL MIL-SPEC PARAMETERS)

 

DUE TO THESE BEING WEAPON SYSTEM COMPONENTS GUNSMITH INSTALL IS REQUIRED FOR ALL ARIZONA REGULATOR ® PRODUCTS.

 

ATTN: THE ARIZONA REGULATOR® IS A MIL-SPEC BASED SEMI-AUTO SYSTEM(S) THAT J.D. ENGINEERED USING THE OG MIL-SPEC

 

 ALL OF OUR UNITS OPERATE PERFECTLY WITHIN THE OG MIL-SPEC

 

USE OF NON OG MIL-SPEC PRINT PARAMETER PARTS OR LACK THEREOF IN CONJUNCTION WITH OUR OG MIL-SPEC SYSTEM MAY CAUSE SELF INDUCED ISSUES

 

NOTEABLY BUFFER TUBES - THE ORIGINAL MIL-SPEC RIFLE AND CARBINE TUBES ARE WHAT USED THUS THOSE ARE WHAT WE ENGINEERED OUR SYSTEM WITH.  THESE ARE THE INDUSTRY STANDARD LENGTHS USED IN RIFLES CARBINES AND PISTOLS NOWADAYS.

 

AS PER OUR INSTRUCTIONS YOU MUST USE A 10.00 OZ BUFFER WITH 9MM AS THOSE ARE THE PROPER LENGTH TO ENSURE THE ORIGINAL TIMING FOR THE 9MM MIL-SPEC GUNS IN MANITAINED.  THE 10.00 OZ BUFFER OVERALL LENGTH IS THE EQUIVELANT OF THE OG 2 PIECE 9MM SMG BUFFER AND THE BUFFER TUBE INSERT THAT USED TO SHIP WITH OG 9MM KITS. 

 

SHOULD YOU HAVE ISSUES AFTER FOLLOWING OUR SIMPLE INSTRUCTIONS INSTALL OG MIL-SPEC PARTS OR THE EQUIVALENT IN PLACE OF THE NON MIL-SPEC PARTS IN YOUR AR RIFLE OR PISTOL.